69 & 69A,
Jalan Temmenggung 20,
Off Jalan Sungai Jati,
41200 Klang,
Selangor, Malaysia.
+603-5161 1409
+6011-5998 1490
+6011-5998 1490
- Analytical Instrumentations
- Level Instruments
- Process Instrumentation
- Smart Measurement Flowmeter
- Valve
Status Automation Technologies Sdn Bhd
69 & 69A,
Jalan Temmenggung 20,
Off Jalan Sungai Jati,
41200 Klang,
Selangor, Malaysia.
69 & 69A,
Jalan Temmenggung 20,
Off Jalan Sungai Jati,
41200 Klang,
Selangor, Malaysia.
Neles EASYFLOW by Neles™ JT Series Angle Stem Tank Bottom Valves
EasyFlow JT series angle stem tank bottom valves provide a compact assembly with additional space for actuator clearance on insulated vessels. Large port has unobstructed flow to empty or fill the tank quickly. Quarter-turn operation and direct actuator mounting capability makes it easy to automate.
Benefits
Applications
Specification
Angle stem tank bottom valves
Features
- Unique low torque Flexi-seat design maintains tight shut-off through pressure and temperature
- cycles is standard for valves without cavity fill
- ISO 5211 mounting pad for direct mounting of handle, gear operator, manual override, or actuator
- An extremely tight fit drive between the stem and ball provides accurate and repeatable shut-off and control
- Cavity fill option includes solid seats without grooves to prevent media being trapped in the cavity between the seats when the valve is open
- Optional T-port ball provides draining of the cavity between the seats when the valve is closed
- When combined, cavity fill and T-port ball option provides the best solution to avoid media inside
- the valve
- Every valve is 100% factory tested before it is packed and shipped
Benefits
- Complete package reliability and single source responsibility with Neles full range of actuators, switches, and intelligent valve controllers.
- Cavity fill and T-port options for the JT series ensure lowest possible dead volume and full draining of media from the valve
Applications
- Pharmaceutical
- Biotech
- Cosmetic
- Food
- Chemical
Specification
| Nominal diameter: | DN25 – DN150 (NPS 1 – 6) |
| Pressure rating: | Class 150 |
| Flange accommodation: | ASME B16.5 Class 150 |
| Vacuum rating: | Up to 20 inch Hg gauge or 26 kPa(a) |
| Leakage: | 100% tightness at full differential pressure rating |
| Standards followed: |
BS EN 17292, ASME B16.34, API 598, BS EN 12266 |
